Skip to content
Pay Online Up To 5% Off

Learn about the using and installation of LED Lighting for your places. A Quick Guide for you.

by Delta Lite 04 Jul 2023

Learn about the using and installation of LED Lighting for your places. A Quick Guide for you. 

Installation of led lights  

To install LED lights, follow these general steps: 

  1. Gather the necessary tools and materials:  

You will typically need LED lights, appropriate connectors or fixtures, wire strippers, electrical tape, screws or adhesive (depending on the mounting method), and a ladder. 

  1. Determine the installation location: 

 Decide where you want to install the LED lights. Measure the area and plan the layout, taking into account any specific requirements or lighting goals. 

  1. Ensure safety:  

Before starting any electrical work, turn off the power at the circuit breaker or fuse box to avoid any electrical hazards. Use a voltage tester to confirm that the power is off in the area where you'll be working. 

  1. Install connectors or fixtures: 

 If your LED lights require connectors or fixtures, follow the manufacturer's instructions to install them securely. This may involve wiring the connectors, attaching brackets, or mounting the fixtures onto the desired surface. 

  1. Make electrical connections: 

 If necessary, strip the insulation off the wires according to the manufacturer's guidelines. Connect the positive (+) and negative (-) wires of the LED lights to the corresponding terminals on the connectors or fixtures. Use wire nuts or electrical tape to secure the connections and ensure proper insulation. 

Generally, the light requirements for different places are different. In accordance to their use LED Lights are characterized into two categories: 

  • Indoor Lights. 
  • Outdoor Lights. 

Indoor Lights: 

Indoor Lights are made for indoor places like rooms, halls, offices etc. These lights are specially designed according to the indoor environments to light up the interiors as per requirements. 

Indoor lights include: 

  • LED Bulbs 
  • LED Downlights 
  • LED Tube Rods 
  • LED Panel Lights 
  • LED Batten Lights 

Outdoor Lights: 

Outdoor lights are designed to meet outdoor lighting requirements with greater power and lumens to give maximum brightness. At open places, there is less reflection available due to which more light is required. Hence these lights are high powered with a bigger sized chip. 

Outdoor Lights include: 

  • Flood Lights 
  • Street Lights 

Different areas and their Lighting requirements: 

Offices: 

Offices are working places and require brighter white light to keep the working environment fresh bright. At normal and small offices there are mostly downlights used in roofs or celling and bulbs are also used at some offices while at offices having large halls, there are LED panels used to meet the lighting needs. Tube rods can also be used with a wall or roof-mounted fittings. There are a lot of smart and elegant designed fittings available to be used according to the places. Lights used in Office are mostly above 6000 K. 

Homes: 

At homes there isn’t that much bright light required as in offices. Mostly there LED bulbs and LED downlights are used. Tube Rods are also used in halls and TV launch. Lights at home mostly have color temperature round about 4000K while below 3000k is also used in living rooms or rest places to provide relaxed environment. 

At the outdoors like Lawns, LED Floodlights are used according to the area. Normally 50 watt Flood Light is used domestically. 

Industry: 

For industry higher lumens of light are required per square feet. Hence there are mostly LED Bulbs and Tube rods used according to the requirement. At outdoor and in bigger halls flood light suits the best. Moreover, at parking areas and passages Floodlight or street lights both can be used. 

Streets and Roads: 

For streets and roads, there is a requirement of high power lights. Hence LED Street light best suits there. It is specially designed for such a place. 

1.What are the benefits of LED lighting? 

 LED lighting offers benefits such as energy efficiency, long lifespan, cost savings, durability, environmental friendliness, instant lighting, and design flexibility. 

2.How do LED lights work? 

 LED lights work by passing an electric current through a semiconductor material, which emits light due to the movement of electrons. 

3.Are LED lights suitable for all types of spaces? 

 Yes, LED lights are suitable for a wide range of spaces, including homes, offices, commercial buildings, outdoor areas, and more. 

4.What types of LED lights are available?  

LED lights are available in various forms, including bulbs, strips, panels, downlights, and more, catering to different lighting needs and preferences. 

5.How do I choose the right LED lights for my spaces? 

 Consider factors such as the purpose of lighting, desired brightness level, color temperature, wattage, lumens, and beam angle when choosing LED lights. 

 

Sample Paragraph Text

Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo eu convallis vitae interdum non nisl. Maecenas ac est sit amet augue pharetra convallis nec danos dui. Cras suscipit quam et turpis eleifend vitae malesuada magna congue. Damus id ullamcorper neque. Sed vitae mi a mi pretium aliquet ac sed elitos. Pellentesque nulla eros accumsan quis justo at tincidunt lobortis deli denimes, suspendisse vestibulum lectus in lectus volutpate.
Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items